Settings
Shipping country
Languages
You do not have any products in your shopping cart yet.
Quick purchase

Please enter the article no.

Digital frequency converter (speed changer)

Product no.: TA-D
Digital frequency converter (speed changer)
Digital frequency converter (speed changer)
Shipping time: 4 - 5 Arbeitstage
125,00 EUR
19 % VAT incl. excl. Shipping costs
Add to cart
  • Products description
Products description

Speedo Converter / tachometer pulse converter adapter

Adjustable frequency converter (frequency multipliers or frequency dividers) for up to nine times the gain.

With this module you can for example, a speed signal from a 4-cylinder, thus increasing that a tachometer can be controlled from a 6-cylinder.

Continue to be used as a tachometer, speedometer recalibration module in wrong speed displayed by tire conversions, correcting the speed display up or down. It is soldered directly into the tacho signal line. The trim is done in steps of 1% by three zehnpolige step switch according to a simple calculation.

With the appropriate setting for this module can also cause the conversion from miles to kilometers. This is needed when you replace one miles by one kilometers Speedo Speedo.

 Note
When ordering you can specify the K value of the tachometer and the giver (how many pulses per distance or frequency at a certain speed), if you specify the value of the deviation of the tachometer, speedometer, we can set the adapter in advance. Then you need only install the adapter. A further adjustment in the installed state at any time.

Technical data:

  • Power supply: 9-28 V
  • Quiescent current: 4.6 mA at 13.8 volts supply
  • Input signal: at least 2 volts peak to peak, potential independent, maximum 2,5 kHz by 12 volts square-wave in and maximum 1,6 kHz by 5 volts square-wave in
  • Output: square wave signal at the level of operating voltage minus 1.3 volts, a maximum of 13.1 volts, maximum 5 kHz

Alternatively, the module also can provide a sine wavel output. Please specify when ordering!

Value:
with 3 tap changers, the ratio can be adjusted input frequency to output frequency between 5% and 900%.

Bundle with VSS-01
This article can also be ordered as a bundle, in conjunction with our signal amplifier VSS-01 in a housing. The Signaverstärker here is already in the housing of the speedometer adapter installed also. With this package, the speed signal of the vehicle directly to an ABS sensor can be tapped. Price of the bundle package: 10%

PLEASE NOTE THE STATUTORY PROVISIONS RELATING TO THE CHANGE IN THE SPEEDO DISPLAY!


Important NOTE:
Modifications to vehicle components and parts that are critical to road safety (e.g., steering, braking system, tires, chassis, and load-bearing parts) may invalidate the vehicle's operating license. Items with KBA approval, TÜV approval, or EC type approval can be installed in a motor vehicle without further approval if used as intended. Information on the requirement for registrations as part of an individual approval can be obtained from the relevant motor vehicle inspection organizations. Please note the legal situation in this regard.

 


Hersteller: Michael Zitzmann, Wiesendorf 15, 92637 Weiden, info@zmm-electronic.de, Tel.: 09605/9250340
Recommend
Sine-square-signal converter 0.1 V
Shipping time: 4 - 5 Arbeitstage
65,00 EUR
19 % VAT incl. excl. Shipping costs
Customers who bought this product also bought the following products:
Sine-square-signal converter 0.1 V
Shipping time: 4 - 5 Arbeitstage
65,00 EUR
19 % VAT incl. excl. Shipping costs
Ignition fire signal simulator
Shipping time: 4 - 5 Arbeitstage
49,00 EUR
19 % VAT incl. excl. Shipping costs
Speed transducer 6 - 4 Zylinder
Shipping time: 4 - 5 Arbeitstage
69,00 EUR
19 % VAT incl. excl. Shipping costs
Ignition voltage converter
Shipping time: 4 - 5 Arbeitstage
65,00 EUR
19 % VAT incl. excl. Shipping costs
Last viewed: