digital frequency converter (speed changer)

digital frequency converter (speed changer)
For a larger view click on the thumbnail
Shipping time: 3 - 4 Days
Product no.: TA-D
from 115,00 EUR
19 % VAT incl. excl. Shipping costs
Housing

Add to cart



  • Details
  • Recommendation
  • Customer-tip
  • Wichtiger Hinweis:

Products description

Speedo Converter / tachometer pulse converter adapter

Adjustable frequency converter (frequency multipliers or frequency dividers) for up to nine times the gain.

With this module you can for example, a speed signal from a 4-cylinder, thus increasing that a tachometer can be controlled from a 6-cylinder.

Continue to be used as a tachometer, speedometer recalibration module in wrong speed displayed by tire conversions, correcting the speed display up or down. It is soldered directly into the tacho signal line. The trim is done in steps of 1% by three zehnpolige step switch according to a simple calculation.

With the appropriate setting for this module can also cause the conversion from miles to kilometers. This is needed when you replace one miles by one kilometers Speedo Speedo.

 Note
When ordering you can specify the K value of the tachometer and the giver (how many pulses per distance or frequency at a certain speed), if you specify the value of the deviation of the tachometer, speedometer, we can set the adapter in advance. Then you need only install the adapter. A further adjustment in the installed state at any time.

technical data:

  • Power supply: 9-28 V
  • Quiescent current: 4.6 mA at 13.8 volts supply
  • Input signal: at least 2 volts peak to peak, potential independent, maximum 4,5 kHz by 12 volts square-wave in and maximum 1,6 kHz by 5 volts square-wave in
  • Output: square wave signal at the level of operating voltage minus 1.3 volts, a maximum of 13.1 volts, maximum 5 kHz

Alternatively, the module also can provide a sine wavel output. Please specify when ordering!

Value:
with 3 tap changers, the ratio can be adjusted input frequency to output frequency between 5% and 900%.

Bundle with VSS-01
This article can also be ordered as a bundle, in conjunction with our signal amplifier VSS-01 in a housing. The Signaverstärker here is already in the housing of the speedometer adapter installed also. With this package, the speed signal of the vehicle directly to an ABS sensor can be tapped. Price of the bundle package: 10%

PLEASE NOTE THE STATUTORY PROVISIONS RELATING TO THE CHANGE IN THE SPEEDO DISPLAY!


Recommended products:

Recommend

Sine-square-signal converter 0.1 V

Signal converter / signal amplifier / sine rectangle converter

Shipping time: 3 - 4 Days
53,00 EUR
19 % VAT incl. excl. Shipping costs

Customers who bought this product also bought the following products:

Ignition fire signal simulator
Driver for the connection of a conventional tachometer (Ingition coil connector) to a square wave signal.
Shipping time: 3 - 4 Days
53,00 EUR
19 % VAT incl. excl. Shipping costs
Ignition voltage converter

Ignition voltage converter to square signal

Shipping time: 3 - 4 Days
53,00 EUR
19 % VAT incl. excl. Shipping costs
Speed transducer and Ignition fire signal simulator

Speed transducer and Ignition fire signal simulator

Shipping time: 3 - 4 Days
129,00 EUR
19 % VAT incl. excl. Shipping costs
Speed transducer 6 - 4 Zylinder

Frequenzy divider for 4-cylinder tachometer to 6-cylinder engine (square wave)

Shipping time: 3 - 4 Days
84,00 EUR
19 % VAT incl. excl. Shipping costs
frequency divider

Universal division of a rectangular signal

Shipping time: 3 - 4 Days
53,00 EUR
53,00 EUR per piece
19 % VAT incl. excl. Shipping costs
frequenzy doubler

For the doubling of a rectangular signal

Shipping time: 3 - 4 Days
59,00 EUR
19 % VAT incl. excl. Shipping costs

Bei Änderungen von Baugruppen und Teilen am Fahrzeug die von einer ausschlaggebenden Bedeutung für die Verkehrssicherheit sind (z.B. Lenkung, Bremsanlage, Bereifung, Fahrwerk und tragende Teile) kann die Betriebserlaubnis des Fahrzeuges erlöschen. Artikel mit KBA-Zulassung, TÜV-Gutachten oder EG-ABE können bei bestimmungsgemäßer Verwendung ohne weitere Abnahme in ein Kraftfahrzeug eingebaut werden. Informationen über die Notwendigkeit von Eintragungen im Rahmen einer Einzelabnahme erhalten Sie von den bekannten Kraftfahrzeug-Überwachungsorganisation.
Beachten Sie hierzu die Rechtslage.

 

Overview   |   Product 4 of 4 in this category« first   |  « back   |  next »   |  last »