20 Jahre ZMM-Electronic
Sie befinden sich im Onlineshop von ZMM-Electronic
 0 Artikel im Warenkorb
Warenwert:  0,00 EUR
Zum Warenkorb
SSL Verschlüsselung Mitglied im ido Verband
linie
digital frequency converter (speed changer)
from 109,00 EUR
19 % VAT incl. excl. Shipping costs
Product no.: TA-D
Print product data sheet
Shipping time: 1-2 days
digital frequency converter (speed changer)
digital frequency converter (speed changer)

Speedo Converter / tachometer pulse converter adapter

Adjustable frequency converter (frequency multipliers or frequency dividers) for up to nine times the gain.

With this module you can for example, a speed signal from a 4-cylinder, thus increasing that a tachometer can be controlled from a 6-cylinder.

Continue to be used as a tachometer, speedometer recalibration module in wrong speed displayed by tire conversions, correcting the speed display up or down. It is soldered directly into the tacho signal line. The trim is done in steps of 1% by three zehnpolige step switch according to a simple calculation.

With the appropriate setting for this module can also cause the conversion from miles to kilometers. This is needed when you replace one miles by one kilometers Speedo Speedo.

 Note
When ordering you can specify the K value of the tachometer and the giver (how many pulses per distance or frequency at a certain speed), if you specify the value of the deviation of the tachometer, speedometer, we can set the adapter in advance. Then you need only install the adapter. A further adjustment in the installed state at any time.

technical data:

  • Power supply: 9-28 V
  • Quiescent current: 4.6 mA at 13.8 volts supply
  • Input signal: at least 2 volts peak to peak, potential independent, maximum 3 kHz by 12 volts square-wave in and maximum 1,6 kHz by 5 volts square-wave in
  • Output: square wave signal at the level of operating voltage minus 1.3 volts, a maximum of 13.1 volts, maximum 5 kHz

Alternatively, the module also can provide a sine wavel output. Please specify when ordering!

Value:
with 3 tap changers, the ratio can be adjusted input frequency to output frequency between 5% and 900%.

Bundle with VSS-01
This article can also be ordered as a bundle, in conjunction with our signal amplifier VSS-01 in a housing. The Signaverstärker here is already in the housing of the speedometer adapter installed also. With this package, the speed signal of the vehicle directly to an ABS sensor can be tapped. Price of the bundle package: 10%

PLEASE NOTE THE STATUTORY PROVISIONS RELATING TO THE CHANGE IN THE SPEEDO DISPLAY!



Housing: 
Signal out: 
 


 


Technische Änderungen und Irrtümer vorbehalten.

Wichtige Hinweise:

Einige unserer Module sind TÜV-geprüft und verfügen über eine KBA-Zulassung. Diese Artikel können bei bestimmungsgemäßer Verwendung ohne weitere Abnahme in ein Kraftfahrzeug eingebaut werden. Bei Verwendung im öffentlichen Strassenverkehr ist sicherzustellen daß eine CE - Kennzeichnung bzw. eine ABE oder ein Prüfgutachten vorhanden ist, ansonsten ist die Verwendung nur für Sportzwecke freigegeben. Informationen über Eintragungen im Rahmen einer Einzelabnahme erhalten Sie von den bekannten Kraftfahrzeug-Überwachungsorganisation.



Recommended products:
Recommend:
Sine-square-signal converter 0.1 V
Sine-square-signal converter 0.1 V
from 49,00 EUR
19 % VAT incl. excl. Shipping costs

 

| Payment Options | Shipping and payment | Privacy | Terms and conditions | Imprint | Contact | Sitemap | Dealer Information | Revocation | Installation partner | Legal Notices |
footer
Copyright (C) 2012 ZMM-Electronic
Alle Texte, Bilder und Videos sind Eigentum des Betreibers der Webseite ZMM-Electronic.de
Vervielfältigung oder Verwendung auf eigenen Webseiten nicht ohne schriftliche Genehmigung
Parse Time: 0.125s